Shell&Tube Surface Condenser for Heavy Oil Cooling

The title of most widely used product falls on the name of In a Shell and Tube Surface Condenser for Heavy Oil Cooling when we talk about heat transmission in chemical engineering and alcohol production. With materials like carbon steel, red copper or stainless steel as its components, our In Shell a nd Tube Condenser comprises 2 tube-sheets, a shell, front and rear bonnets, several tubes, baffles, as well as other connecting devices.

From the inlet of the front bonnets to the outlet of the rear bonnet, the mission of fluid A is thus completed. The channels in the tube through which it flows is tube side. At the same time, the track of fluid B, starting from one connecting pipe of the shell to the other, is called tube side.

Materials of One Shell Pass Two Tube Pass Heat Exchanger

Principle of Our In a Shell and Tube Surface Condenser

In Shell and Tube Condenser is a pressure system consisting of two separate pressure chambers (shell chamber and tube chamber). Separated by the internal tube wall, two media fl ow past one another with such alignment that, if there is a temperature difference, they will mutually exchange heat without mixing in the process.

As the picture shows,one medium fl ows through the shell chamber and the second medium travels through the tube chamber. The fluid that goes through the shell chamber is also controlled by baf fl es in a bid to increase the duration of heat exchanging as much as possible. The form and spacing of the baf fl es are in line with the relevant operational use.

Sobre nós

Jiema is a direct manufacturer of One Shell Pass Two Tube Pass Heat Exchanger, Air Radiator, Plate Heat Exchanger, Pressure Vessel and corresponding heat exchanger spare parts (plate, finned tube, gasket) . We devote ourselves to service of HVAC, chemical industry, food and drink, paper - making, pharmaceutical industry, smelting industry, power station and other heat transmission areas alike . Jiema In a Shell and Tube Surface Condenser for Heavy Oil Cooling is not only popular in domestic market, but also warmly welcomed by end users all around the world.

☏FAQ of In Shell and Tube Condenser

1. Is In a Shell and Tube Surface Condenser cleanable?

As most of In a Shell and Tube Surface Condenser s are welded, cleaning is the least thing that we would recommend our customers to do.

2. What's the difference between a Fixed Tube Heat Exchanger such as One Shell Pass Two Tube Pass Heat Exchanger and a Floating Head Heat Exchanger?

Expense of Floating Head Heat Exchanger is much more vast than that of a Fixed Tube Heat Exchanger . Naturally, with great cost comes great performance. Floating Head Heat Exchanger can accept wide temperature difference and reduce thermal stress at the same time. However, One Shell Pass Two Tube Pass Heat Exchanger can cope with temperature exchanging just right if low temperature difference.